Usually indicates that a Frigidaire top-load washer is out of balance during spin.
officialSource: officialLast verified: 2026-06-24Can use appliance: limited
What to check first
Can I keep using it?
Do not bypass locks or latches
Do not bypass a door, lid, latch, or lock sensor to keep the appliance running.
Safe next step
Check only visible obstructions, let hot appliances cool, and use the manual before any access step.
Stop when
The door will not lock or unlock normally, parts look damaged, or the appliance could run with the door unsecured.
Safety boundaries
Safe first
Match the exact brand, appliance type, and displayed code first.
Use the model manual as the final authority for access steps.
Do not do this
Do not use other cycles as a workaround unless the manual allows it.
Do not bypass locks, float switches, leak sensors, or other safety systems.
Common causes include
Unbalanced laundry load
Washer not level
Shipping support not removed during installation
Basic checks
Wait until the basket has stopped.
Redistribute laundry so the load is balanced.
Check that the washer rests firmly on the floor.
Reset or retry steps
Retry the spin portion only after balancing the load and confirming the washer is stable.
When to call a technician
Call service if E4 returns with small balanced loads.
Use the installer if the washer was installed or moved recently.
FAQ
What does Frigidaire Washer code E4 usually mean?
Usually indicates that a Frigidaire top-load washer is out of balance during spin.
Can I keep using the washer with code E4?
Limit use to the owner-level checks described here and in the model manual. Stop using the appliance if the code returns, the appliance behaves abnormally, or a safety warning applies. Do not reach into the washer until the basket has stopped.
When should I call a technician for Frigidaire E4?
Call service if E4 returns with small balanced loads. Use the installer if the washer was installed or moved recently.
