Usually indicates that an Electrolux front-load washer is not filling during the wash phase.
officialSource: officialLast verified: 2026-06-24Can use appliance: no
What to check first
Can I keep using it?
Do not bypass locks or latches
Do not bypass a door, lid, latch, or lock sensor to keep the appliance running.
Safe next step
Check only visible obstructions, let hot appliances cool, and use the manual before any access step.
Stop when
The door will not lock or unlock normally, parts look damaged, or the appliance could run with the door unsecured.
Safety boundaries
Safe first
Match the exact brand, appliance type, and displayed code first.
Use the model manual as the final authority for access steps.
Stop and address visible water before retrying the appliance.
Turn off water before disconnecting any hose.
Do not do this
Do not keep running the appliance while this code is active.
Do not disconnect inlet hoses until the water supply is off.
Do not bypass locks, float switches, leak sensors, or other safety systems.
Common causes include
Hot and cold hoses reversed
Water supply not meeting requirements
Recent installation or movement issue
Basic checks
Check that hot and cold supplies are connected correctly.
Check water supply requirements in the use and care guide.
Avoid repeated unplug resets while the washer is in a lockout window.
Reset or retry steps
Retry only after water supply and installation issues are corrected.
When to call a technician
Contact the installer if the washer was installed or moved recently.
Schedule service if E11 returns after water supply checks.
FAQ
What does Electrolux Washer code E11 usually mean?
Usually indicates that an Electrolux front-load washer is not filling during the wash phase.
Can I keep using the washer with code E11?
Do not keep using the appliance until the visible issue has been checked and the relevant safety warnings have been addressed. Turn off water before hose work.
When should I call a technician for Electrolux E11?
Contact the installer if the washer was installed or moved recently. Schedule service if E11 returns after water supply checks.
